This reflective tape is able to reflect light from all applicable angles on the roadway. With long sight distance performance at 1000 candlepower, this tape has a tremendous brightness and wide angle of reflection. A unique single ply construction promises impact and abrasion resistance. Dirt, weather, and impacts cannot keep this hazard tape from doing what it does best: reflecting light.

For more sizes and options, please take a look at our full line of DOT reflective hazard tapes. which can be found in our safety tape department.

• 3" x 50 yd roll - minimum order of 2 rolls.
• Application temperature: minimum 50°F.
• Durability - 5-year or 10-year warranty - Withstands brushing off of dirt and grime, and high pressure washing. Polyester based film resists cracking & lifting. Retains reflectivity even after impact against loading dock or abrasion by chains.
• Unique - single-ply construction ensures impact & abrasion resistance and easy application.
• Resistance - 0.008" thickness resists dirt accumulation typical of competitor's thicker (0.025"), open-cell construction. Material is extremely thin so there are no raised edges that can catch and tear.
• Unlike competing conspicuity materials, Reflexite® conspicuity material features 100% adhesion, with no grid lines that can fill with water and cause premature adhesive failure.
• Super-high brightness & wide angularity: Typically 1000 candlepower with tremendous long sight distance performance; reflects at all applicable angles on the roadway.

*Please Note: NHTSA conspicuity regulations (effective 12/1/93) mandate that all new trailers - 10,000 lbs GVW and 80” wide or larger, must be reflectorized with alternating red & white retro reflective sheeting on the sides, bottom of rear door, and ICC bar; and two pieces of white sheeting on the upper corners of the rear.