• 14" x 18 " Shrink Wrap Area
• 18" Shrink Wrap Film Capacity
• Adds a Film Perforator, Magnetic Hold Down
  and legs to the MP1 Sealer

• Width + Height = Front Seal Dimension
  (This should be less than 12" even though the width of the seal chamber is 14" wide)
• Length + Height = Cross Seal Dimension
  (This should be less than 16" even though the length of the seal chamber is 18" long)

Freight is FOB Ship Point

The Damark Shrink Wrap Machine (MP-2) is built from a heavy-gauge welded steel body and legs. The MP2 shrink machine is the next step up in the MP series of wrappers with more standard features than the Damark MP-1 Shrink Wrapper. The MP-2 includes an electromagnetic hold down seal jaw, variable speed conveyor belt, film perforator roller and electronic temperature control on the shrink tunnel as standard features.

If you are looking for a smaller capacity shrink machine, take a look at our Single Step Shrink Wrapper or view our complete line up of Shrink Wrap Equipment.

• Shrink Wrap Film
• PTFE Heat Sealing Tape
• Casters
• Film Clamps
• Hot Knife Seal Head
• MP-3 Shrink Wrap Machine by Damark (upgrade)

• Wraps 8 to 10 packages per minute
• Low voltage impulse sealing system
• Electronic solid-state temperature control
• Tunnel chamber 24"L x 16"W x 9"H
• Variable speed silicone rubber belt conveyor
• Dual blower motor / heater system
• Electronic solid-state temperature controller, holds +/- 3 degrees
• Top and side heat vents
• System works with all shrink films

• Electrical: 220V/1PH/16A
• Film Width: 18" maximum
• Unit dimensions: 79L x 30W x 52H
• Shipping dimensions: 83L x 32W x 56H
• Shipping weight: 300 lbs.