• Heat Sealer & Tunnel Combo
• 16" x 20" Shrink Wrap Area
• 20" Shrink Wrap Film Capacity

• Width + Height = Front Seal Dimension
  (This should be less than 14" even though the width of the seal chamber is 16" wide)
• Length + Height = Cross Seal Dimension
  (This should be less than 18" even though the length of the seal chamber is 20" long)

Freight is FOB Ship Point

This Damark Shrink Wrapper Packaging System is part of our complete Shrink Wrap Equipment line up and was designed for stable products such as boxes, brochures, or flat products with a 4" or greater length or diameter.

It can also be used for unstable products such as bottles or products that are 4" or less in length or diameter. The Damark Shrink Wrapper Packaging System includes some features as standard equipment; electro-magnetic hold down and air cylinder return for smooth operation of the sealing bar.

The Shrink Tunnel is included and features a proportional temperature controller guaranteeing a maximum temperature variation of no more than 2 degrees in the shrink chamber. This makes the Damark LS-1 a complete all in one shrink wrap system!

If the Damark Shrink Wrapper Packaging System is larger than you need, take a look at our Single Step Shrink Wrapper or view our complete line of Shrink Wrap Equipment.

Optional Accessories:

• Shrink Wrap Film
• PTFE Heat Sealing Tape
• Gravity Discharge Conveyor
• Hot Knife Seal Head
• Power Film Unwind with Inverting Head
• LSR model for boxes, brochures, or flat product with a 4" or greater length or diameter
• LSB model for bottles or product that are 4" or less in length or diameter

• Twin magnets: less operator fatigue, more consistent seals
• Counterbalanced sealing head with automatic air cushion return
• Easily adjusted film cradle
• Engineered for "blind assembly" installation
• Film clamps: more consistent seals, less rejects
• Unique seal area raise/lower mechanism
• Micro-processor controlled, low voltage, impulse sealing system
• Conveniently located control panel
• Heavy duty welded steel tubular construction
• Comes complete with heated hole punch
• Built-in storage shelf for additional rolls of film