• 14" x 18" Shrink Wrap Area
• 18" Shrink Wrap Film Capacity

• Width + Height = Front Seal Dimension
  (This should be less than 12" even though the width of the seal chamber is 14" wide)
• Length + Height = Cross Seal Dimension
  (This should be less than 16" even though the length of the seal chamber is 18" long)

Freight is FOB Ship Point

This Damark MP-1 Shrink Wrapper is the basic model in the MP series of shrink wrappers from Damark Packaging. Equipped with solid state temperature controls, adjustable film cradle and stainless steel product loading tray, the Damark MP-1 is a great addition to your shrink packaging area.

The MP shrink wrapper has dual blower motors in the heat tunnel and variable speed silicone rubber belt conveyor to reduce product slippage during the shrink sealing operation. These standard features set the Damark shrink wrappers above other basic equipment.

Looking for a large capacity shrink wrapper? Take a look at our Damark Shrink Wrapper Packaging System or view our complete line up of Shrink Wrap Equipment.

• Shrink Wrap Film
• 6 MIL PTFE Heat Sealing Tape
• Casters
• Film Clamps
• Gravity Discharge Conveyor
• Hot Knife Seal Head

• Wraps 4 to 6 packages per minute
• Low voltage impulse sealing system
• Electronic solid-state temperature control
• Tunnel chamber 24" L x 16" W x 9" H
• Variable speed silicone rubber belt conveyor
• Dual blower motor / heater system
• Top and side heat vents
• System works with all shrink films

• Electrical: 220V/1PH/15A
• Film Width: 18" maximum
• Unit dimensions: 79" L x 30" W x 22" H
• Shipping dimensions: 83" L x 32" W x 30" H
• Shipping weight: 250 lbs.