This 'Flood Master' portable flood pumper extractor from CleanFreak pumps out liquid, sludge, and solids up to 1/2" in diameter, at a rate of 30 gallons per minute. A rust proof stainless steel basket inside the body, where the recovery hose enters the tank, traps all solids for later removal. This flood pumper extractor offers a large coverage area, with the 50 foot recovery hose, 50 foot dump hose and the 12" squeegee wand.

The Flood Master has a 3-stage vacuum motor and heavy duty fiber composite body to withstand demanding environments. With a pump flow rate of 1800 gallons per hour, this is one of the highest rated flood pumpers on the market! Because of the 10 gallon capacity and rear dump valve, you're able to use this machine as a typical extractor. It has very easy access to all mechanical components for future maintenance and repairs. Besides working well for flood recovery, this flood pumper also works well with pressure washers, and is great for picking up slurry from cutting concrete and marble on construction sites.

Features

• Capable of recovering water & debris, then discharging to an acceptable drain.
• 50' vacuum hose and 50' dump hose give the user a ton of coverage area.
• 12" double squeegee wand is great for recovery in hard floor areas.
• Two 10" rear wheels and two 1" swivel casters make it easy to maneuver the unit from job site to job site.
• Fiber composite body makes the unit lightweight and durable.
• 30 GPM flow makes emptying flooded basements and pools a quick and easy affair.
• Machine cover lifts up for easy access to flood pumper vacuum motor.
• 1/3 HP pump out motor has a vortex impeller and epoxy coated cast iron housing.
• Vacuum motor has a steel fan cover with aluminum blades and double ball bearings.
• Typically operates on a 15 amp circuit, but may need to be switched to a 20 amp circuit when run under a continuous heavy load.